Should I use Olaplex 3 on dry or wet? (2023)

For best results, it is recommended to use Olaplex 3 on wet hair. This ensures that the product can better penetrate the hair cuticle and help repair any broken bonds. Olaplex 3 should be used as the last step in your hair care routine, after you have applied any other leave-in treatments or styling products.

You should begin by wetting your hair with lukewarm water and then, section by section, apply the Olaplex 3 to the mid-lengths and ends of hair. Massage the product in for a few minutes and then rinse it out with cool water.

To finish, apply a few pumps of Olaplex 4, Olaplex 5 and Olaplex 6, working your way up the hair shaft. These products can be used both on wet and dry hair, and they help to lock in the repairing effects of Olaplex 3.

Table of Contents

Do you apply Olaplex 3 to wet hair?

No, Olaplex 3 should not be applied to wet hair. The product works best when the hair is towel dried and damp. If applied to wet hair, the product may not properly penetrate the hair shaft and could cause potential damage due to excessive chemical saturation.

Additionally, when using Olaplex 3, it’s important to be sure that the hair is separated into four even-sized sections as this will ensure the product is evenly distributed throughout the hair. Taking the proper steps to pre-treat the hair with Olaplex 3 will guarantee the best results.

What is the way to use Olaplex 3?

Olaplex 3 is a take home treatment that can be used to restore and repair damaged hair. It works by using a patented active ingredient, Bis-Aminopropyl Diglycol Dimaleate, to help strengthen the bonds in the hair and reduce breakage.

To use Olaplex 3, start by shampooing your hair and towel drying it to help remove any dirt or oil. Then, apply a quarter-sized amount of Olaplex 3 to damp hair, focusing on the mid-lengths and ends.

Leave it on for at least 10 minutes, then rinse thoroughly. After rinsing, apply Olaplex No. 4 Bond Maintenance Conditioner and leave it on for 3-5 minutes before rinsing. For best results, use Olaplex 3 once a week for best results.

Do you use Olaplex 3 before or after shampoo?

Olaplex 3 (also known as Olaplex Hair Perfector No.3) is designed to be used after shampooing. It is used as a regular at-home treatment and can be used once a week or once a month, depending on your specific hair type and needs.

To use, shampoo your hair and then towel dry until it’s just damp. Apply Olaplex 3 evenly throughout your hair, using a wide-toothed comb to ensure even distribution. Leave it on your hair for at least 10 minutes and then rinse out with lukewarm water.

It is important to note that Olaplex 3 should be used in conjunction with Olaplex No.1 and No.2 (also known as Olaplex Bond Multiplier and Olaplex Hair Perfector No.2, respectively). Together, these three products form a powerful at-home system for repairing damaged hair and protecting it from further damage.

Do you wet your hair before Olaplex?

No, you should not wet your hair before Olaplex. Before using Olaplex, you should shampoo and condition your hair. Before the application of Olaplex, it is important to make sure all the shampoo and conditioner is thoroughly rinsed out of your hair.

If you wet your hair, it is possible that water droplets could be left on your hair, and this could dilute the Olaplex treatment, reducing its effectiveness in repairing your hair. After shampooing and conditioning, it is important to wait for your hair to be completely dry before applying Olaplex, as water will act as a barrier and will not allow the treatment to penetrate your hair cuticles, which is necessary for it to work effectively.

If you need to manage any tangles or knots before applying, using a wide-toothed comb is the best way, as this will prevent your hair from being pulled and broken.

Can you leave Olaplex 3 on too long?

Yes, it is possible to leave Olaplex 3 on for too long. Olaplex 3 is an at-home hair strengthening treatment that helps to ‘reset’ bonds in the hair to a healthier state. This is beneficial if your hair has been damaged from chemical treatments like coloring or bleaching.

While Olaplex 3 is safe and gentle enough to use at home on your own, it is important to follow the instructions included with the product in order to get the most out of it. Leaving the product on for too long can lead to breakage as the hair bonds will become over-strengthened.

Additionally, leaving the product on for too long may strip your scalp of natural oils and cause dryness, which can further damage your hair. For best results, use Olaplex 3 following the instructions provided, leave in for the recommended time and rinse thoroughly.

Why does my hair feel like straw after Olaplex?

Your hair can feel like straw after Olaplex because the product breaks down the disulfide bonds of your hair strands, which can also open the cuticle and make the hair appear rough after the treatment.

This is only a temporary effect as the hair needs to be moisturized and nourished properly to restore its original texture and softness. You may also experience this feeling if you were to use too much of the product or if you had the treatment done too often.

To remove the straw-like feeling, use a moisturizing conditioner afterwards, which can help to close the cuticle again and provide deep hydration to the hair. You can also use a leave-in conditioner, hair oil, and hair mask to add extra moisture.

How do I prepare my hair for Olaplex 3?

Preparing your hair for Olaplex 3 is relatively simple. First, shampoo and condition your hair with a sulfate-free product such as Olaplex No.4 Bond Maintenance Shampoo and No.5 Bond Maintenance Conditioner.

After shampooing and conditioning, gently towel-dry your hair and use a wide-tooth comb to detangle. Next, apply Olaplex No.4 Bond Maintenance asecond time to ensure the product is evenly distributed throughout your hair.

Leave the product in for at least 20 minutes. As you wait, apply a heat protectant such as Olaplex No.6 Bond Smoother on each section of your hair to protect it from the heat of styling tools. Once ready, create your desired hairstyle using hot tools such as a curling iron or flat iron.

Finally, use a leave-in treatment with Olaplex No.7 Bonding Oil to seal the cuticles and protect your hair from heat and environmental damage.

Is it better to leave Olaplex 3 on overnight?

It depends on personal preference and the condition of your hair. Olaplex 3 is a hair treatment, which is designed to strengthen, restore, and protect all types of hair. It helps to rebuild broken bonds in the hair and restore it to its natural condition.

The treatment is designed to be used once a week, and ideally, you should leave it in for a minimum of 10 minutes before rinsing it out.

In general, the amount of time you leave Olaplex 3 on for depends on your hair. If you have very damaged or porous hair, leaving the treatment on for longer can help to deeply hydrate and nourish the hair for improved strength and resilience.

Leaving it on overnight can be a great way to give your hair an extra boost of nourishment, but be careful not to over-use the treatment, as this can cause build up. If you have healthy hair, you may find that 10 minutes is enough, and you can safely rinse it out after this amount of time.

Ultimately, it’s up to you to decide whether to leave Olaplex 3 on overnight. We would advise considering the condition and texture of your hair, and discussing the benefits with your hair stylist to find the best treatment plan for you.

Is Olaplex good for greasy hair?

Yes, Olaplex can be a great option for greasy hair. It’s a hair repair treatment that can improve the overall condition of your hair. It works to bond broken hair together, creating a stronger and healthier hair strand.

It’s also great for deep conditioning. It helps to nourish the hair cuticles and revitalize the scalp, while reducing excess oil and grease. Additionally, it helps to protect hair from further damage, so it’s an ideal treatment for those with greasy hair.

It’s also safe for color treated hair and chemically treated hair.

Should Olaplex be applied to wet or dry hair?

Olaplex should be applied to wet hair. It is a bond builder treatment that works best when applied to strands that are already damp. When applied to dry hair, the Olaplex can cause the hair to flake or become dry and brittle, which defeats the purpose of the treatment.

Before applying Olaplex, it’s important to thoroughly wet the hair with lukewarm water and make sure that each strand is wet throughout. This is especially important when using the No. 3 Hair Perfector, which requires the hair to be saturated in order to work properly.

Once the hair is fully wet, shampoo and condition as usual, then towel-dry the hair until it is just damp – not too wet and not too dry. After that, take the appropriate amount of Olaplex No. 3 Hair Perfector or No.

4 Bond Maintenance Shampoo and apply it to the strands, focusing on the mid-lengths and ends. Leave the product in for the allotted time (see the instructions on the product’s packaging) then rinse it away before styling.

Following these steps when applying Olaplex will ensure that you get the best results and keep your hair healthy and strong.

How damp should hair be for Olaplex?

When applying Olaplex to your hair, it is best to start with damp, not soaking wet, hair. Allow the natural moisture of your hair to be your guide. If possible, lightly mist your hair with a water bottle or apply a lightweight water-based styling product to ensure that your hair is damp enough.

The goal is to ensure that your hair is fully saturated with the Olaplex treatment and that the product can penetrate the cuticle and work its magic.

If your hair is too dry, the Olaplex may not be able to penetrate the cuticle and reach the bonds. When the Olaplex is properly absorbed into the hair, the product can start to repair and strengthen the bonds, restoring healthy, revived hair.

Keep in mind that, depending on your texture and length, it may take longer for your hair to be completely saturated, so be patient and gentle with it!

Can I let my hair dry with Olaplex?

Yes, you can let your hair dry with Olaplex. Olaplex is a treatment and repair system designed to help your hair stay healthy, nourished and protected from damage. It works by reconstructing the broken bonds and strengthening the hair cortex to make it more resilient and less prone to damage.

Olaplex can be used when washing, conditioning and styling your hair, meaning it can be left to air dry and won’t damage your hair. Olaplex works by connecting broken bonds that form as a result of chemical, thermal, and mechanical damage.

This helps to protect and maintain the integrity of your hair from further damage.

Should I air dry my hair after Olaplex?

Yes, you should air dry your hair after Olaplex. This is because air drying allows for a more gentle drying process and helps ensure that the Olaplex treatment is able to penetrate your hair cuticles and do its job properly.

Air drying also helps minimize unnecessary heat damage to your hair. Heat can be damaging to your hair and if you use tools like a blowdryer, curling iron, or flat iron too often or at too high of a temperature, it can strip your hair of its natural oils and leave it dry and brittle.

Air drying ensures you still get a great style while protecting your hair from the risk of damage.

What order do you apply Olaplex?

When using Olaplex, it is important to follow the instructions as listed on the product packaging. Depending on your hair type and the look you are trying to achieve, there are different steps to follow.

Generally, Olaplex is made up of three parts: the Bond Multiplier, the Bond Perfector and the No.3 Hair Perfector.

First, you should start by applying the Bond Multiplier No.1 to your hair. This should be done by lightly spraying it onto damp, towel-dried hair. Then, you should massage the product in and work it through your hair from the roots to the tips.

When this step is done, rinse the product from your hair and towel dry before moving onto the next step.

Next, you will apply the Bond Perfector No.2. For this step, you will need to comb the product through your freshly cleansed hair, from the roots to the tips. You should then leave the product in for about 5 to 10 minutes.

After the product has been in your hair for a few minutes, rinse it thoroughly and blow dry as normal.

Finally, on a weekly basis, you should apply the Olaplex No.3 Hair Perfector to your hair in order to continue to replenish your hair’s natural shine and strength. Starting at the root, you should comb the product into your hair and leave it in for about 10 minutes.

Once the product has had time to work, you should rinse it out and style your hair as usual.

By following these steps each time you use Olaplex, you should be able to achieve healthy, strong hair that is full of shine and vitality.

Top Articles
Latest Posts
Article information

Author: Maia Crooks Jr

Last Updated: 01/30/2023

Views: 5391

Rating: 4.2 / 5 (43 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Maia Crooks Jr

Birthday: 1997-09-21

Address: 93119 Joseph Street, Peggyfurt, NC 11582

Phone: +2983088926881

Job: Principal Design Liaison

Hobby: Web surfing, Skiing, role-playing games, Sketching, Polo, Sewing, Genealogy

Introduction: My name is Maia Crooks Jr, I am a homely, joyous, shiny, successful, hilarious, thoughtful, joyous person who loves writing and wants to share my knowledge and understanding with you.